SunRotor           SunRotor Logo            SunRotor
301 West 12th Street l Elk City, Oklahoma  73644

Toll Free:  1-866-246-7652
l Phone:  1-580-225-1704 l Fax:   1-580-225-1120

Home Page  -  Products  -  Contact Us  -  Why Go Solar?  -  Testimonials  -  Typical Installations  -  MAP 

SunRotor & SunCentric Solar Pumps

  •  0 - 210' Total lift capacity.

  • 3 - 6 GPM pump rates (Helical Rotor pumps)

  • 7.5 - 28 GPM pump rates (Centrifugal pumps)

  • Helical Rotor and Centrifugal style pump ends

  • Brushless Permanent Magnet DC drive motor

  • 24 - 48 VDC operating voltages

  • Very simple and dependable - only one moving part in the pump

  • Very easy to rebuild with common hand tools.

SunRotor SRP-3.3-24 Data Sheet

SunRotor SRP-6.0-36 Data Sheet

SunRotor / SunCentric - Sizing a Pump System

Call 1-866-246-7652 for system sizing, pump selection assistance & pricing.

SunRotor_3

  SunRotor SRP-3.3-24-150 pump and rotor/stator replacement kit.

SunRotor helical rotor (progressive cavity) pumps are a cost-effective alternative to submersible diaphragm solar pumps.  The SunRotor model SRP-3.3-24-150 is a 3.3 gpm pump that has the ability to lift water from up to 100' when powered by as little as 130 watts of solar power and up to 150' when powered by only 170 watts.  The SunRotor model SRP-3.3-24-150 will run efficiently with two 12 volt solar panels or one 24 volt solar panel which makes this pump an ideal replacement for most 24 volt diaphragm pumps and the cost is comparable to or less than the price of diaphragm pumps.

Instead of complicated diaphragms, springs and valves SunRotor helical rotor pump ends contain only one moving part - the rotor.  SunRotor pumps are designed to deliver dependable, trouble-free service for many years but, if the pump performance becomes diminished due to sand, debris or aging,  SunRotor pump ends are very simple and easily repaired in the field with a new rotor/stator kit pictured above and common hand tools. 

ADDITIONAL BENIFITS OF SunRotor HELICAL ROTOR SOLAR PUMPS

SunRotor Logo
  • NO annual diaphragm replacements

  • NO motor brush replacements

  • NO delicate motor plugs that leak and fail

  • NO pistons, cams or flapper valves to fail

  • NO plastic parts

  • NO electronics in the well

  • NO submergence limitations (pressure balance, water-filled motor)

SunRotor Logo

SOLAR PUMP INFORMATION & SIZING GUIDE

Dealer opportunities available - Call 1-866-246-7652 for more information.