SOLAR PUMPS
SOLAR PUMPS301 West 12th Street l Elk City, Oklahoma 73644 Toll Free: 1-866-246-7652 l Phone: 1-580-225-1704 l Fax: 1-580-225-1120 Home Page - Products - Contact Us - Why Go Solar? - Testimonials - Typical Installations - MAP |
Pump System Accessories
|
|
Antifreeze Bleeder Valve Assembly: This part is spliced into the well pipe at a point below freezing point (usually 5 or 6 feet below the well seal assembly). It allows water in the above-ground piping to drain back into the well when the pump is not pumping. The assembly includes 2 all stainless steel tubing clamps. Antifreeze Bleeder Valve Assemblies Call 1-866-246-7652 for current prices. |
![]() |
Pedestal-Type Float Switch. This switch can be configured for either Normally Open or Normally Closed operation.
Switch with Float, Rod and Hardware. Call 1-866-246-7652 for current price.
|
![]() |
Tether-Type Float Switch (Normally Open or Normally Closed): Most
pump controllers use a Normally-Open type switch which closes and sends a
signal to the pump controller to turn the pump off when water reaches the
top of a tank. Some applications may require a Normally-Closed type
switch. The tank level must drop six to ten inches before the switch
restarts the pump.
Switch is available with or without mounting hardware. Call 1-866-246-7652 for current prices. |
![]() |
Slosh-Guard float switches are designed to turn the pump
on and off with a tank water level drop of only one inch. This will
allow the tank water level to remain near the top and small calves will not
have difficulty getting to the water.
Slosh-Guard float switches are designed to eliminate rapid on/off cycles caused by water level fluctuations created by wind and livestock. Slosh-Guard Type Float Switch w/mounting hardware. Call 1-866-246-7652 for current prices. |
![]() |
Well Seal Assemblies come with a stainless steel pump safety rope
eyebolt, a pump wire strain relief, a drop pipe with barbed fitting and all
stainless steel hose clamps.
Well Seals are available from 3" to 8" Call 1-866-246-7652 for current prices. |
Call for current price on submersible pump wire and other installation hardware.
1-866-246-7652